Autowatch Ghost Immobiliser Installation
The Ghost is the UK's most advanced aftermarket immobiliser designed for CAN buses. It's discrete, doesn't employ key fobs or LED indicators and is concealed within the wiring of the vehicle.
It also allows users to disable the system temporarily by using Transport Mode for when they are renting out their vehicle. This guide will walk you through the process of installing an Ghost immobiliser.
Professional Installation
The Autowatch Ghost immobiliser is a advanced security device that safeguards your vehicle against hacking, key cloning and relay attacks. The system is directly connected to your car's ECU and is protected by a unique PIN code that you can choose. It's inaccessible to thieves using diagnostic scanners or other modern methods, and is not able to be disabled by circuit cuts.
The system is simple to use, but professional installation is recommended to ensure a smooth connection with the ECU of your vehicle. Installers certified by Thatcham can assist with the installation and programing of your Ghost system. They can also recommend a tracking or alarm system to complete the protection package for your vehicle.
To avoid the accidental deployment of airbags or short circuits To avoid an accidental deployment of airbags or short circuits, the installer must disconnect your battery. Once this is done the installer is now able to begin work. Basic hand tools are useful for making precise connections, while a multimeter can be used to verify the electrical properties and safety. Cable ties and insulation tape are also vital for protecting connections and keeping wiring tidy. The Ghost Immobiliser user manual will provide specific guidelines tailored to your model.
It is essential to choose the right grounding spot that is free of dirt or paint during installation. Installers should also ensure that the immobiliser's wires, CAN H and the CAN L are connected to the correct ECU ports. Based on the model, these wires might need to be soldered or plugged in. Using a quality connector is recommended to ensure a durable and secure connection.
Once the install is complete Once the installation is completed, the customer can enable the Transport Mode. This allows mechanics or valet parking to use the vehicle, without knowing the pin code. The customer must press the service icon on the dashboard five times within 2 seconds. The system will confirm this by showing 5 indicators.
The Autowatch Ghost 2 is a highly efficient immobiliser that's TASSA verified and Thatcham approved. It's a smart option for anyone who regularly rents out their vehicles on platforms like Turo. Immobilisers can lower insurance costs, since it reduces the risk of theft.
Getting Started
It's not difficult to come up using an autowatch immobiliser in order to guard your car from thieves. The device stops your car from running even when someone copies or steals your key. It's possible because of its advanced technology that stops the engine from starting until the correct PIN code has been entered.
The device works by connecting to the vehicle's CAN bus network and allowing it to communicate with the ECU directly. It uses buttons that are already present on the dashboard and the steering wheel to create a unique sequence that only you know which makes it impossible for others to start your vehicle. This is the most secure way to safeguard your pride and joy. It will not lose its value should you ever decide to sell it.
Installing Ghost's immobiliser is straightforward however, you must follow the instructions to avoid electrical problems and malfunctions of the system. You must first locate a 12V power supply and a solid grounding on the car's chassis. Then, you can begin connecting the wires to the immobiliser. Make sure to use high-quality connectors and soldering methods to ensure a secure connection. Also, ensure that you protect the connections by insulating them by using heat shrink tubing or insulation tape to shield them from electrical short circuits and other issues.
Once the wires have been connected, you are able to connect the battery and begin the engine to check if the immobiliser is working. If everything is functioning properly you can place it in a secure location under the dash or somewhere else in the vehicle. Make sure to hide it properly to stop thieves from getting into it.
The Ghost 2 immobiliser is TASSA (Tracker and Aftermarket Security System Association) verified, which means that it complies with the highest standards of security and is a fantastic deterrent to car thieves. It offers superior protection against key cloning, hacking and relay attacks, and it cannot be disabled without knowing the code. It is also simple to use and can be set into an auto valet mode so that your automobile isn't activated if you bring it in for service or an MOT.
Wiring
The Ghost Immobiliser, a cutting edge security system, is designed to prevent vehicle theft. It communicates with your vehicle's ECU and directly connects to the CAN bus. Contrary to other aftermarket systems which require the removal of circuit components The Ghost Immobiliser does not interfere with the factory settings for your vehicle.
It's also totally undetectable by thieves using diagnostic scanners. This is due to the fact that it doesn't send and receive radio frequency signals, and it relies on CAN data to communicate with your ECU. It doesn't require any modifications to your existing key fobs.
To use the Ghost Immobiliser, simply turn on your car's ignition and enter your sequence for disarming (either one or two buttons). The indicator will flash twice to confirm that you've entered the correct code. You are now able to start your vehicle and drive safely.
Once installed Once installed, the Ghost Immobiliser will safeguard your vehicle from key cloning and hacking while preserving the value of your car's pride and joy. In Transport Mode, you can temporarily disable the Ghost Immobiliser if you need to give your vehicle to service or valet park.
To complete the Ghost Immobiliser installation, you'll need locate the source of power that is constant (12V) and a grounding point. Be sure that both are properly insulated and can be touched. It is also recommended to use cable tie to secure and bundle the wires, since this will decrease the chance of being tampered with by thieves. To avoid committing mistakes, make sure to double-check these points and mark them with a label or tape. Examine all connections for signs that they are wearing out. Connections that are loose can cause system malfunctions, so be sure that they're firmly in place and securely insulated. Don't forget to test your Ghost Immobiliser after the installation is completed. This will ensure that the unit is functioning properly and that all connections are secure and insulated. Be sure to correct any issues as soon as they arise.
Testing
The Autowatch Ghost immobiliser is an innovative vehicle security system that works seamlessly with your car's ECU to stop the motor from starting without authorization. Its innovative technology safeguards your vehicle from hacking and key cloning along with other methods used by thieves to steal vehicles. Learn Additional is a perfect complement to existing alarm and tracking systems to provide the best security for your car. This system's unmatched features and secluded design make it a preferred choice for car enthusiasts and security-conscious motorists alike.
It is essential to follow the steps of installation in order to ensure complete integration of the Ghost Immobiliser. Check the wiring diagram of your vehicle to help you locate and connect the wires. You'll then need to identify the grounding and power sources. Once you've identified these you'll be required to mark them so that they're easy to identify when installing. It is also important to use top-quality tools and materials. Basic hand tools will aid in making precise connections. A multimeter will verify electrical values, and ensure security. Cable ties and insulation tape will keep the connections tidy and neat. A Ghost-specific user's manual is also available.
Before you begin installing it is important to test the system by entering the PIN code and starting the vehicle. This will ensure that the immobiliser functions according to plan, and prevents unauthorised vehicle starts. It is recommended that you perform this step regularly as part of your routine vehicle inspections to ensure that the system is operating properly.
Once the installation has been completed, you are now able to start driving your car with confidence. The Ghost will help keep your precious possessions secure from thieves who might steal it and ensure that nobody is able to escape with your car without the correct PIN code. The Ghost can be linked to an approved Thatcham tracker that detects any attempts at theft or tampering. This allows you to track your vehicle if it is stolen.
The Ghost can be used on a variety of vehicles and is compatible with the majority of major manufacturers. If you're looking to secure your vehicle with this innovative device, call Monty's Locksmith today to learn more about our installation and maintenance options. We are a TASSA registered installer, a certificate that ensures that we adhere to strict standards for installing our products. This ensures customers insurance companies, customers, and law enforcement agencies that installations are done safely and in a safe manner.